Preparing small plots
Prepare garden plots and small fields for planting with a matched tiller or plough. Soil condition, working depth and available turning space guide the implement choice.
Explore typical tasks and the site conditions or attachments to consider for each job.
Prepare garden plots and small fields for planting with a matched tiller or plough. Soil condition, working depth and available turning space guide the implement choice.
Break down cultivated soil or work with a suitable planter. Match the implement to your crop spacing, hitch and drive requirements.
Use a compatible trailer to move tools, supplies or harvested crops around the farm. Loaded weight, braking and the route determine the suitable trailer setup.
Plan work in small fields, around buildings or between crop rows. Allow room for both the tractor and implement at gates, corners and row ends.
| Parameter | Value |
| Drive Type | 4WD |
| Engine | Weifang 490 naturally aspirated engine |
| Emission Standard | Stage II / EU Stage V |
| Engine Power | 44.2 kW |
| Clutch | Single-acting |
| PTO Speed | 540/760 rpm |
| PTO Spline Count | 6 |
| Rated Drawbar Pull | ≥12 kN |
| Machine Weight | 1350 kg |
| Steering | Hydraulic steering |
| Hydraulic Output | 2 groups of hydraulic output |
| Gears | 8+8 |
| Speed Range | Forward 1–30 km/h; reverse 1–28 km/h |
| Tire Size | 6.5-16/11.2-24 |
| Wheelbase | 1800mm |
| Overall Dimensions | 3200 × 1500 × 1930 |
| Optional Equipment | Front ballast; Rear ballast (one layer); Sunshade; Fan cab; Flat floor; Air-conditioned cab; Air pump |
Certificate holder: Shandong Rongfeng Agricultural Machinery Co., Ltd. · Unified Social Credit Code 91370600MAK38ND64D · Registered office: Yantai High-tech Zone, Shandong · Production base: Jining, Shandong

UDEM International Certification, Ankara, Türkiye · Certificate M.2023.206.C80974 · Directive 2006/42/EC, Annex VIII · Valid to 3 January 2028 · Verify at udem.com.tr

Shandong Seatone International Certification · Certificate 10421Q00220R0S · Accredited under IAF MLA and CNAS C104-M · Valid 29 July 2025 – 28 July 2028

Ente Certificazione Macchine Srl, Bologna, Italy · Certificate 0P221115.SNECC99 · Covers RF-WT8–WT22 and RF-T12–T280 · Valid to 14 November 2027 · Verify at entecerma.it

Tell us your application, preferred model, configuration, quantity, and destination. Our team will review your requirements before preparing the quotation.
We use your contact information only to respond to your equipment inquiry.
Tell us the jobs you do most often, the implements you want to use and your field conditions. We will help match the tractor’s power, weight and hydraulic capacity to the work. If you already own implements, send their models or nameplate photos. PTO-driven implements should be matched to PTO power, not engine horsepower alone.
No. Engine horsepower is measured at the engine; PTO horsepower is the power available to drive an implement after drivetrain losses. Send us the implement model or its power requirement, and we will help check PTO power, speed and shaft compatibility for the tractor you are considering.
The right transmission depends on your field work, transport needs and how often you change direction. Tell us how you plan to use the tractor, especially for loader or confined-space work, and we will explain the transmission options available for the selected model.
We can help check that. Send the implement model, nameplate or clear photos of its connection points. We will review the hitch, PTO, hydraulic requirements, implement weight and lifting capacity against the selected tractor, and explain any mismatch before you order.
Send us the load weight, its approximate size, the attachment you plan to use and the lifting height. We will help compare these with the loader specifications and the required ballast for the selected tractor. Safe capacity varies with reach, lift height and configuration, so one maximum lift figure is not enough to confirm a match.
Tell us about your soil, road travel and row spacing. We will help compare the tire and wheel-spacing options available for the selected tractor, including the overall width needed for orchards or greenhouses. Tire choice, ballast and operating limits should also suit the loads and terrain.