Working between greenhouse rows
Work within planted rows while allowing clearance for crops, supports and irrigation lines. Measure the narrowest aisle and overhead clearance with the intended implement attached.
Explore typical tasks and the site conditions or attachments to consider for each job.
Work within planted rows while allowing clearance for crops, supports and irrigation lines. Measure the narrowest aisle and overhead clearance with the intended implement attached.
Prepare beds between crop cycles with a suitably sized tiller or other cultivation tool. Match working width and depth to bed layout and soil condition.
Move harvested produce, trays or supplies with a compatible trailer. Plan the route through doors and aisles, including space to turn with the load.
Plan access between greenhouses, nursery areas and outdoor plots. Check door thresholds, path width and ground firmness before choosing the setup.
| Overall Dimensions | 2550 × 1300 × 1300 mm |
| Rear Power Output | High-pressure two-way hydraulic output; dual PTO 540/720 rpm |
| Diesel Engine Brand | Laidong / Weifang engine |
| Walking Speed | 2.2–32 km/h |
| Machine Weight | 1470 kg |
| Working Speed | 6–10 mu/h |
| Fuel Consumption | 7 L/h |
| Air Filter | Three-stage oil type |
| Transmission | Direct gear transmission |
| Water Tank | Water circulation |
| Tire Size | Front 600-12; rear 9.5-16 |
| Gearbox | Customized pure gear transmission |
| Gears | 8+2 or 8+8; optional side-mounted or center-mounted gear shift |
| Engine Power | 70 HP / 51.5 kW |
| Ground Clearance | 210 mm |
| Wheelbase | 1860 mm |
Certificate holder: Shandong Rongfeng Agricultural Machinery Co., Ltd. · Unified Social Credit Code 91370600MAK38ND64D · Registered office: Yantai High-tech Zone, Shandong · Production base: Jining, Shandong

UDEM International Certification, Ankara, Türkiye · Certificate M.2023.206.C80974 · Directive 2006/42/EC, Annex VIII · Valid to 3 January 2028 · Verify at udem.com.tr

Shandong Seatone International Certification · Certificate 10421Q00220R0S · Accredited under IAF MLA and CNAS C104-M · Valid 29 July 2025 – 28 July 2028

Ente Certificazione Macchine Srl, Bologna, Italy · Certificate 0P221115.SNECC99 · Covers RF-WT8–WT22 and RF-T12–T280 · Valid to 14 November 2027 · Verify at entecerma.it

Tell us your application, preferred model, configuration, quantity, and destination. Our team will review your requirements before preparing the quotation.
We use your contact information only to respond to your equipment inquiry.
Tell us the jobs you do most often, the implements you want to use and your field conditions. We will help match the tractor’s power, weight and hydraulic capacity to the work. If you already own implements, send their models or nameplate photos. PTO-driven implements should be matched to PTO power, not engine horsepower alone.
No. Engine horsepower is measured at the engine; PTO horsepower is the power available to drive an implement after drivetrain losses. Send us the implement model or its power requirement, and we will help check PTO power, speed and shaft compatibility for the tractor you are considering.
The right transmission depends on your field work, transport needs and how often you change direction. Tell us how you plan to use the tractor, especially for loader or confined-space work, and we will explain the transmission options available for the selected model.
We can help check that. Send the implement model, nameplate or clear photos of its connection points. We will review the hitch, PTO, hydraulic requirements, implement weight and lifting capacity against the selected tractor, and explain any mismatch before you order.
Send us the load weight, its approximate size, the attachment you plan to use and the lifting height. We will help compare these with the loader specifications and the required ballast for the selected tractor. Safe capacity varies with reach, lift height and configuration, so one maximum lift figure is not enough to confirm a match.
Tell us about your soil, road travel and row spacing. We will help compare the tire and wheel-spacing options available for the selected tractor, including the overall width needed for orchards or greenhouses. Tire choice, ballast and operating limits should also suit the loads and terrain.